适用于 Iray 渲染器的 MMX 尼龙材质和缎面材质

MMX 尼龙和缎面材质适用于 Iray 渲染器，为您提供了 4 种材质不透明度映射设置，可将材质从几乎不透明调整为薄透的网状结构。同时，还配有材质平铺预设，平铺范围从 100 到 1000，间隔为 25。此外，您还能获得 70 种材质颜色和 7 种灰度颜色。通过 21 种光泽度预设，您可以将材质从有光泽的缎面调整为柔和的棉质效果。请注意，如果您手动调整设置，光泽度预设会调整法线贴图，而非反射贴图。这是为了避免在渲染时出现闪烁现象。 此外，还可为材质应用 38 种图案。其中 8 种是简单的形状，其余 30 种是精美的几何设计。所有图案均可平铺多达 50 次，且图案所用的颜色与材质颜色一致，方便您根据需要进行搭配。还有 21 种强度预设，用于调整图案在材质上的显著程度。请注意，应用图案不会自动设定强度值，必须手动调整图案强度

MMX Nylon and Satin for Iray gives you 4 fabric opacity map settings to go from almost opaque fabric to a thin see-though mesh. These are accompanied by fabric tiling presets that range from 100 to 1000 in increments of 25. In addition to this, you will get 70 fabric colors and 7 greyscale colors. With the 21 shine presets, you can go from a shiny satin to a diffused soft cotton. Please note that if you are manually adjusting settings, the shine presets adjust the normal map and not the glossy settings. This was done to avoid producing fireflies when rendering. There are also 38 patterns that can be applied to the fabric. Eight patterns are just simple shapes, and the other 30 are beautiful geometric designs. The patterns can all be tiled up to 50 times, and the same colors available for the fabric are also available for the patterns, allowing you to mix them as you see fit. There are 21 strength presets to adjust how strong the patterns appear on the fabric. Please note that applying a pattern does not set a strength value. Pattern strength must be applied manually.